2021 Inspection Results -

Repair details are on the bottom of this page below the overview. 

If you have questions about repairs please save them for Tuesday at the Repair Tent.

Car Number Type Division VIP
301 Local Stock no
302 Local Stock VIP
303 Local Stock VIP
304 Local Stock no
305 Local Stock VIP
306 Local Stock VIP
307 Local Stock VIP
308 Local Stock VIP
309 Local Stock notdone
310 Local Stock VIP
311 Local Stock no
312 Local Stock VIP
313 Local Stock VIP
314 Local Stock VIP
315 Local Stock VIP
316 Local Stock VIP
317 Local Stock VIP
318 Local Stock VIP
319 Local Stock VIP
320 Local Stock VIP
321 Local Stock VIP
322 Local Stock no
323 Local Stock VIP
324 Local Stock no
325 Local Stock no
326 Local Stock VIP
327 Local Stock VIP
328 Local Stock no
329 Local Stock VIP
330 Local Stock VIP
331 Local Stock VIP
332 Local Stock VIP
333 Local Stock VIP
334 Local Stock no
335 Local Stock VIP
336 Local Stock VIP
338 Local Stock no
339 Local Stock VIP
340 Local Stock VIP
341 Local Stock VIP
342 Local Stock VIP
343 Local Stock VIP
344 Local Stock VIP
345 Local Stock VIP
346 Local Stock VIP
347 Local Stock VIP
348 Local Stock no
349 Local Stock VIP
350 Local Stock no
351 Local Stock VIP
352 Local Stock VIP
353 Local Stock no
354 Local Stock no
355 Local Stock VIP
356 Local Stock no
357 Local Stock no


Car No. = 301,    Local,    Stock    NON VIP

  • Failed item 6. "Steering hardware per plans, Photos 4.7, 4.19, & 4.13(a) & (b) ".   Reason -> needs N washer
  • Failed item 11. "Steering cable routing per plans, Photos 5.23, 5.26, 5.37(a) & (b) ".   Reason -> wrong wrap
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 302,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 303,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 304,    Local,    Stock    NON VIP

  • Failed item 8. "Cable pulley hardware per plans, Photo 5.5 ".   Reason -> wrong wrap
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 305,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 306,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 307,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 308,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 309,    Local,    Stock    NON VIP

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!
  • Failed item 38. "Local Race City Organization OR Rally Region, Photo 13.1 (all views) ".   Reason -> nose too long


Car No. = 310,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 311,    Local,    Stock    NON VIP

  • Failed item 24. "Fixed weight hardware per plans, Photo E20.6".   Reason -> cut wt bolts
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!
  • Failed item 40. "Coatings with tung oil and/or wax,  ".   Reason -> nose too long


Car No. = 312,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 313,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 314,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 315,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 316,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 317,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 318,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 319,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 320,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 321,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 322,    Local,    Stock    NON VIP

  • Failed item 14. "Stock radius rod assembly per plans, Photos 6.14, 6.17, 6.21 & 6.24 ".   Reason -> replace radius rods (bowed & polished d
  • Failed item 16. "New brake pad installed,  ".   Reason -> replace pads
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 323,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 324,    Local,    Stock    NON VIP

  • Failed item 13. "Bushing installed per plans, Photos 6.5 & 6.7".   Reason -> need 2 inch washers
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 325,    Local,    Stock    NON VIP

  • Failed item 1. "Steering stop hareware per plans, Photo 1.3".   Reason -> cut bolts
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 326,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 327,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 328,    Local,    Stock    NON VIP

  • Failed item 15. "Brake pad installed per plans, Photos 7.1 & 7.4".   Reason -> brake pad
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 329,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 330,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 331,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 332,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 333,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 334,    Local,    Stock    NON VIP

  • Failed item 23. "Adjustable weight hardware per plans, Photo 9.10".   Reason -> seat weight too long
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 335,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 336,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 338,    Local,    Stock    NON VIP

  • Failed item 3. "Bushing installed per plans , Photo 3.5 & 3.7 ".   Reason -> remove 1 1/4 washer on bottom
  • Failed item 4. "Front kingpin washer stack per plans , Photo 3.17".   Reason -> remove 1 1/4 washer on bottom
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 339,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 340,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 341,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 342,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 343,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 344,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 345,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 346,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 347,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 348,    Local,    Stock    NON VIP

  • Failed item 5. "Rear kingpin washer stack per plans, Photo 3.19 ".   Reason -> remove N washer
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 349,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 350,    Local,    Stock    NON VIP

  • Failed item 23. "Adjustable weight hardware per plans, Photo 9.10".   Reason -> seat weight too long
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 351,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 352,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 353,    Local,    Stock    NON VIP

  • Failed item 23. "Adjustable weight hardware per plans, Photo 9.10".   Reason -> center wt. too long
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 354,    Local,    Stock    NON VIP

  • Failed item 14. "Stock radius rod assembly per plans, Photos 6.14, 6.17, 6.21 & 6.24 ".   Reason -> wrong washers
  • Failed item 23. "Adjustable weight hardware per plans, Photo 9.10".   Reason -> remove sharp edges on center weight
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 355,    Local,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = 356,    Local,    Stock    NON VIP

  • Failed item 6. "Steering hardware per plans, Photos 4.7, 4.19, & 4.13(a) & (b) ".   Reason -> wrong wrap- cable needs another wrap around steering post
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!
  • Failed item 40. "Coatings with tung oil and/or wax,  ".   Reason -> nose too long


Car No. = 357,    Local,    Stock    NON VIP

  • Failed item 15. "Brake pad installed per plans, Photos 7.1 & 7.4".   Reason -> change brake pad
  • Failed item 17. "Brake pedal hardware per plans, Photos 8.4, 8.12 & 8.18 ".   Reason -> change eye bolts
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!